How to Lay Brick Border Garden Edging | Easy DIY (2024)

Last Updated on June 28, 2023 by lindseymahoney

If you’re looking for a simple and cost-effective way to add some visual interest to your garden, consider using bricks as edging.

Not only do they provide a clean and classic look, but they also help to define garden beds and prevent grass and weeds from encroaching on your plants.

Here’s how to do it right.

How to Lay Brick Edging to Border Flower Beds

Affiliate links are used in this post, thank you for supporting Building Bluebird! For a complete list of materials used in this project, scroll to the bottom of the post.

Brick Edging Purchase List

• Gardening gloves
• Bricks (similar)
• Garden Edger
• Flat Shovel
• Handheld Shovel
• Paver Base Step 1
• Paver Sand Step 2
• Rubber Mallet
• Short Level
• Long Level
• Measuring Tape
• String line & Stakes
• Additional edging guide options: Garden hose or a scrap of wood

Brick border edging is a great way to add color and interest to your garden and is a great DIY for beginners. It also makes for a beautiful and charming border around your flower beds.

1 | Gather Bricks for the Garden Edging

I was able to use the pile of unused bricks in the corner of our backyard.

A few flower beds originally had bricks as edging, but were overgrown and buried. I dug up all of the bricks to install again.

2 | Determine the Brick Border Shape

Choose the shape of your flower bed where the bricks will create the garden border. Your brick border can be completely straight or it may decide to create a soft s-curve.

To visualize the design of your brick garden border, use a hose to trace the edging. The bricks can be laid horizontally or vertically.

My personal preference is a vertical brick border, but it does require more bricks.

We used this style of brick border edging in the backyard of our second home, too.

3 | Create a Guide to Install the Brick Border

When installing a straight brick border, use a string line as a guide! I have laid brick edging in the past without a guide and my line would always start to curve.

This time, I took the following steps to keep the brick edging straight:

• Determine the width of the flower bed and where you want the brick edge to end (24 inches)
• Measure 24 inches from the metal edging on the other side of the flower bed (measuring from the exterior of your house also works)
• Mark 24 inches with a stake in the center and both ends of the flower bed
• Connect the three stakes with a string to create a guide for the edge of the brick border

If your flower bed border is curved, I recommend using a hose as your guide while laying the bricks.

4 | Dig a Trench to Install the Bricks

I used a flat spade shovel to dig a trench for the bricks, but a garden edger tool is the best tool to use, especially when sod needs to be removed.

The flower bed next to the pool butted up to the concrete pool surround. I wanted the bricks to be flush with the concrete surround, which determined the depth of the trench for the brick border.

I installed another brick border around my English garden. You can see the string line I used as a guide for the trench.

5 | Add A Layer of Paver Base

Next, you will add a few scoops of the paver base to help with draining and leveling the bricks.

If you would like to lay down a weed barrier fabric before the crushed gravel, that is an option and can help prevent weeds.

The crushed gravel acts as a barrier between the bricks and soil and prevents erosion of the brick.

I recommend adding gravel as you lay each brick and not laying down a bunch of gravel at once.

Some people use mortar to build their brick edging which creates a more permanent structure and helps to prevent weeds from growing between the cracks.

Because I only installed a single row of bricks, I chose not to use mortar.

Honestly, I don’t mind pulling weeds if they grow near the bricks because I have to pull the weeds in the flower bed anyway!

6 | Install the Bricks as Edging

When laying the brick, there are a few different areas where you want to pay attention.

Make sure the brick border remains level.

Lay the row of bricks so they are level horizontally (unless you are installing it on sloping ground).

As you begin adding more bricks to the border, use a longer level (I used 24-inch) and keep the bubble in the center.

You may have to dig out more dirt to lower the brick or add more paver base to raise it up.

One of our flower beds sloped down gently on one side, so it was not always completely level.

Each brick is slightly sloped away from the flower bed.

You want the brick to be vertically sloped away (slightly) from the flower bed.

Sloping the brick slightly will allow water to drain away from the flower bed. If it is sloped towards the flower bed, you could get flooding in the bed.

Keep the brick row from curving (if it is a straight border).

Continuously check that you are laying the bricks in a straight line, ideally by the string line guide you have set up.

When I laid the first brick border edging at our house, I had to restart 3 times because the row began to curve. Chris had a great idea to use a fence board as a guide and it worked perfectly.

If I saw a slight curve or a brick out of place, I used a flat shovel to tap the bricks back into place.

Even when I created the string line guide, I ended up with a slight curve! Luckily, it is pretty easy to tap bricks forward and realign.

7 | Tap Each Brick with Rubber Mallet

When you install each brick on the paver base, use a rubber mallet to gently tap it in place.

If the small level shows that one side is too high, use the mallet to tap it down.

If the next brick is too low when you go to install it, add more paver base I like to add enough so that the brick is slightly higher than the vertical row of bricks.

Then when I use the mallet to smack it into place to become even with the row of brick edging.

8 | Lay Remaining Bricks

Continue to lay the brick edging until you have completed the garden border!

What if the final brick doesn’t fit into the last spot of the garden border?

There are a few ways to remedy this issue:

• Flip a brick on its side for half of the width to complete the border – this will require a deeper trench to keep a consistent height
• Use a saw suitable for masonry and cut the brick to fit perfectly
• Fill the remaining border with gravel or soil – I would only suggest this if it is an inconspicuous area or will be covered by foliage

9 | Brush Sand Into the Cracks

Brush paver sand into the cracks of the border to stabilize the bricks. I have used a push broom or my hands to fill the cracks with sand between the brick edging.

Charming Flower Bed Reveal with Bricks as Edging

I love how the green plants look against the distressed white brick of our house and the charming brick border!

We will be adding a small fence around the pool equipment and fresh sod in the coming weeks that will complete the look of these charming flower beds.

Here is another view of that area just a few weeks later with fresh grass!

And a few weeks later with the new fence hiding the pool equipment.

Here is my latest brick border installation around our English garden. The bricks give a defined edge to the garden while still feeling casual.

I also installed brick edging around the concrete skirt of our inground pool.

This project takes a little patience but it is pretty simple once you get the hang of it! Plan on spending a few hours completing this project.

Garden Bed Planting Tips

If you’re planting flowers, choose perennials that bloom year after year. Perennial flowers last longer than annuals, so you’ll enjoy blooms throughout the season.

Choose bulbs that flower early in spring, such as tulips, daffodils, crocuses, and hyacinths.

You can also plant bulbs later in the summer when temperatures are cooler.

Looking for more DIYs to Try Outside?

• How to Camouflage Your Meter Box with Paint
• How to Paint a Shed Yourself | Beginner’s DIY
• Build Your Own Composting System at Home
• How to Build a Simple Raised Garden Box | DIY
• 25+ Easy Outdoor DIY Projects to Try This Year

FAQs

Why should I use bricks as edging for my garden?

Bricks are the perfect material for garden edging for a few reasons:

Cost Benefit

Bricks are an inexpensive option to add a charming decorative feature to your yard.

I found a pile of old bricks in our yard and was able to reuse them for garden edging. Facebook marketplace or Craigslist is a great place to find inexpensive bricks for this project.

Durability

Brick edging is meant to last for years and has been tested to withstand weather and other elements.

Appearance

Brick garden edging comes in a variety of colors and styles. You can find everything from simple brick rows to elaborate designs.

Maintenance

Brick edging requires little maintenance, just weed around the bricks occasionally.

Can you lay bricks directly on the soil?

You can lay bricks directly on the soil but I would not recommend it.

Adding a base layer of gravel will prevent the bricks from eroding. The paver base helps with drainage and keeps the bricks in place.

How much does it cost to lay brick border edging?

The cost of a brick border really depends on the size and design of your border and what you already own.

For our brick border project, we owned all of the tools and a pile of old bricks in our backyard.

The only material we had to purchase was the paver base, which is about $5 per bag.

If you don’t own some of the tools, reach out to friends and family and ask if you can borrow theirs. If you don’t have any bricks, make it known to friends and family that you are looking.

Sometimes a simple Facebook post asking if anyone has bricks they are willing to give away is all you need to secure affordable or even free materials.

Do you need mortar for brick border edging?

No! Brick edging does not require mortar. You absolutely can use mortar to create a sturdy border, but it is by no means required.

What do you put under brick garden edging?

I like to use paver gravel beneath the bricks in the garden.

When bricks are directly on the soil, they can erode more quickly. the paver gravel improves drainage and helps with keeping the brick edging level.

Some people prefer to use sand underneath the bricks which works well too.